Step 6: Mesh
In this step Deneb Aero meshes the first run of the analysis on your computer and checks the mesh, before anything is queued. If the mesh fails, you see where on the aircraft, and nothing is queued. When you launch, the first run solves on this mesh without meshing again.
The Mesh step comes after the Package step, or after the Aircraft step for a flight model. It is not part of an analysis over several speeds.
Procedure
In the Package step (or the Aircraft step), select Review. The Mesh step opens and starts meshing.
Wait. The step shows Meshing α … with the stage and the time. If a run is solving on this computer, the mesh waits for it, then goes first in the queue.
When The mesh passed its checks appears, the wizard moves on to the Review step by itself.
You do not have to wait. Review while it meshes goes on to the Review step; the runs queue behind the mesh.
What the step shows
When the mesh has passed, the step shows:
- Cells
The size of the mesh in millions of cells, and its precision level.
- Each run
About how long each run takes on this computer.
- Memory
The memory a run needs, against the memory a run may use.
- The mesh itself
Cut through the wing shows the cells on a cut across the span. The thin cells hugging the wing are its wall layers. Surface shows the surface mesh. Drag to turn, scroll to zoom.
The line under The mesh passed its checks says which mesher made it:
Deneb’s mesher: Deneb Aero’s own mesher (denebMesh), on the Mac app.
the backup mesher: cfMesh. It meshes on Linux and Windows, and for half models. On the Mac it takes over when Deneb’s mesher fails; the line then says why.
the wall-function mesher: snappyHexMesh, for runs with wall functions, such as a Quick look.
Repaired at upload
If the upload repaired a part, the step lists each repair under Repaired at upload and marks it on the mesh with a number: a part wrapped, a hole filled, a crossing closed, a part meshed again. Select a repair to see it on the mesh. Nothing in this list stops the analysis. A repair marked Check:, such as an open sheet meshed as a thin wall, is worth a look in your CAD.
Precision
The wall-resolved runs, which resolve the boundary layer, can be meshed at two levels:
Level |
Use |
|---|---|
Coarse |
About 30% fewer cells, and about as much less time: a quicker first look. |
Standard |
The default. The Studio is checked at this level. |
Each level shows its cells, its time per run and its memory. Choosing another level meshes again, and every wall-resolved run of the analysis is meshed at it.
The levels are those of Deneb’s mesher, so they are offered on the Mac app only. Elsewhere, and for half models and wall-function runs, the runs mesh at their own sizes, and the step says so.
If the mesh fails
The mesh failed means nothing is queued. Under it, the aircraft is shown in 3D at the place where the mesh failed, with what went wrong there and what to do. See When a Mesh Fails.
Fix the geometry, then select Mesh again. Meshing again without a change builds the same mesh.
If the upload check found a part that crosses itself, the step shows the spots before meshing: The polar cannot be meshed. Select Wrap the part to close it, or fix it in CAD. Review without the polar goes on with the other runs.
When the step cannot mesh
If the simulation service is not running, the step says so. The runs then mesh when they start.
If the mesh cannot be started, the step says why. Review without it goes on; the first run then meshes when it starts.